Home

Cifs return code 13

PERMISSION DENIED (Photo by Hidde van Esch on Unsplash) If you recently updated your RedHat or CentOS 7.6 system, you may suddenly start getting Permission Denied errors when attempting to mount SMB shares via CIFS CIFS VFS: cifs_mount failed w/return code = -13 CIFS: Attempting to mount //192.168.72.129/myshare CIFS VFS: cifs_mount failed w/return code = -13 [root@localhost mnt]# sudo mount -v -t cifs \ -o username=white,password=123,vers=2.0,sec=ntlmssp \ //192.168.72.129/myshare /mnt/share mount.cifs kernel mount options: ip=192.168.72.129,unc=\\192.168.72.129\myshare,vers=2.0,sec=ntlmssp,user=white.

kernel: CIFS VFS: cifs_mount failed w/return code = -13. Falscher sec Mode, anpassen der sec Option ErrorCode -6. Retrying with upper case share name mount error(6): No such device or address Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) Hier dürfte schlicht und ergreifend der Pfad falsch sein, versuch mal gezielt einen Ordner im Share zu mounten . Kommentieren; Mehr . Antwort. CIFS VFS: cifs_mount failed w/return code = -512 Mit Linux-Kerneln ab 4.13 ist SMB3 der Standard, vorher SMB1. Können ältere Shares nicht geöffnet werden (z.B. von Windows XP), hilft es, beim Mounten mit cifs vers=1.0 als Option anzugeben oder für Windows 7 vers=2.1 I had the same sort of thing but managed to over come it. It turned out in my case to be a Group policy which was set to Send NTLMv2 responses only.Refuse LM and NTLM.I changed this to Send LM & NTLM -use NTLMv2 session security if negotiated. Located at: Computer Configuration/Windows Settings/Security Settings/Local Policies/Security Options.The policy is called: Network Security: Lan. I'm trying to mount a rw personal share that is a subdirectory of a ro share windows share on ubuntu 11.10 using the following command: sudo mount -t cifs ///users/ /mnt/ --verbose -o username=,password=,iocharset=utf8,file_mode=0777,dir_mode=0777 The directory structure on the windows share is domain/users/ The users directory is read-only while the is read-write to a specific user CIFS VFS: cifs_mount failed w/return code = -127 Thus, I don't know where the key is located, how it was created, nor what I should do to renew it or ignore it. Click to expand... Try the --verbose switch. Code: mount -t cifs //server/share /mnt/foo --verbose -o user=username . Verify that you have not disabled password authentication via the FreeNAS GUI for the user guest. Also check to see.

Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) and kernel log messages (dmesg) dmesg | grep cifs [ 937.787720] FS-Cache: Netfs 'cifs' registered for caching [ 937.789474] Key type cifs.spnego registered [ 937.789477] Key type cifs.idmap registered [ 8656.242922] CIFS VFS: cifs_mount failed w/return code = -2 I trie Code; Issues 1; Pull requests 0; Actions; Projects 0; Security; Insights returncode=32 is the return code from the mount command, so that failed for some reason on the node the pod is running. My first step to diagnose would be to try and mount the NFS share yourself on that node. If you have root or sudo access to the node, you can try. mount -t nfs -o sec=ntlm,uid=1000 10.244..7:/volume. 2018-06-24T23:58:32+03:00 DiskStation kernel: [ 297.288444] CIFS VFS: cifs_mount failed w/return code = -112 sonst ging immer alles, heute festgestellt das die remote-verbindung nicht mehr geklappt hat, und auch nicht mehr vorhanden war, wollte sie neu erstellen. geht leider nicht. unter windows keine Probleme. habe auch schon den movies ordner gelöscht, dann kommt der exist fehler nicht mehr.

Home » CentOS » Samba Status Code Returned 0xc000006d NT_STATUS_LOGON_FAILURE SessSetup = -13 April 14, 2020 Ralf Prengel CentOS 5 Comment [ 13.671431] CIFS VFS: cifs_mount failed w/return code = -2 [ 13.673594] CIFS VFS: cifs_mount failed w/return code = -2 [ 13.675588] CIFS VFS: cifs_mount failed w/return code = -2 [ 23.155328] snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 2 [ 23.227324] snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 2 [ 57.613993] CIFS: Attempting to mount //192.168.1.3/Projects [ 57. On the affected VM # cat /proc/fs/cifs/Stats Resources in use CIFS Session: 0 Share (unique mount targets): 0 SMB Request/Response Buffer: 0 Pool size: 4 SMB Small Req/Resp Buffer: 0 Pool size: 30 Operations (MIDs): 0 0 session 0 share reconnects Total vfs operations: 64 maximum at one time: 2 On working VM: # cat /proc/fs/cifs/Stats Resources in use CIFS Session: 1 Share (unique mount targets. mount.cifs kernel mount options: ip=10.50.243.13,unc=\lacsqltzgprd4\GoldenGatever=1,user=goldengate_DBA,pass=***** mount error(112): Host is down Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) It has been working fine until now. Not sure if it's a coincidence, but the problem started after we did the Kerberos password change over the weekend. Thanks. BH. Started 2017-04-14T22.

Aborting operation. [ 3.061537] CIFS VFS: cifs_mount failed w/return code = -101. Die Credentials in der Credentials Datei sind ok. Hat jemand eine Idee, wie die Credentials und die SMBv2 Version in der /etc/fstab verwendet werden können ? Grüße Andrea System: ist ein frisch installiertes Debian Wheezy 7.1 im Konsolenmodus mit Samba als Fileserver aus dem Repository. Fehler: nach Grundkonfiguration des Samba als Workgroup mit User Auth und einem einfachen Share für einen angelegten Samba User kommt die Meldung: mount error(13): Permission denied Refer to the mount.cifs( manual page (e.g. man mount.cifs) und im /var/syslog cifs_mount.

CIFS VFS: cifs_mount failed w/return code = -101 Mit 'mount -a' kann man nach dem Start die Laufwerke problemlos einhängen. Wo kann man ein Liste der Fehlercodes von CIFS finden? Und warum wird die fstab nicht vollständig abgearbeitet? Auf anderen Rechnern mit anderen Shares gibt es diese Problem nicht. Es liegt daher nicht an der Syntax in der fstab oder an der Server Konfiguration. Bis vor. Apr 5 13:17:12 raspberrypi kernel: [ 16.448706] CIFS VFS: cifs_mount failed w/return code = -112 Wenn ich es richtig verstanden habe, dann hat sich der Default Wert von V1.0 auf V2.1 geändert. Könnt ihr das bestätigen When I run the following command (as root or via sudo) from a bash script I get an exit status (or return code in mount man page parlance) of 1: mount -v -t cifs //nasbox/volume /tmpdir/ --verbose..

After upgrading a test machine from CentOS Linux release 7.6.1810 to 7.7.1908, we encountered a mount error(13): Permission denied when mounting a CIFS share. The systemd journal shows additional 然而使用 cifs 挂载失败,老是提示没有权限,我反复在 Windows 系统下测试,用户密码千真万确,然而在 ubuntu 上就是无法成功挂载。 最后终于找到问题的根本原因,密码 hash 格式不对,这样系统一直回报密码错误: [602334.718574] CIFS VFS: cifs_mount failed w/return code = -13 エラー発生例「Permission denied」、ログに「CIFS VFS: cifs_mount failed w/return code = -13 」 cat /var/log/messageにてログを確認する. ケルベロス認証の場合. Linux から ActiveDirectory の管理下にあるファイルサーバに接続する. Linux から Active Directory にアクセスするには Kerberos 認証の設定をする必要があります. [ 2290.150000] CIFS VFS: cifs_mount failed w/return code = -2 [ 2298.970000] CIFS VFS: could not allocate crypto hmacsha256 [ 2298.970000] [ 2298.980000] CIFS VFS: could not setup hash structures rc -2 [ 2298.990000] CIFS VFS: cifs_mount failed w/return code = -2. comment:4 Changed 5 years ago by John Thomas <openwrt-devel-2012@> sorry, did not see the prior closing and noting of duplicate. CIFS VFS: cifs_mount failed w/return code = -512. I went through many troubleshooting steps by enabling logging on the corporate firewall and the UFS. However, checking all the logs, I see no connection requests when I run the mount command. But if I start a ping to 10.1.1.10, I see blocked ICMP requests. This means that the mount command is somehow not invoked, or somehow does not leave the.

mount.cifs error 13 after update (CentOS/RedHat Linux 7.6 ..

RHEL - Mounting CIFS Permission Denied (Error code - 13

[root@client1 ~]# mount -t cifs 130.x.y.z/vol1 /testamar -o sec=NTLMV2,username=user1 -vvvv The status code returned from storage is: NT_STATUS_LOGON_FAILURE Kernel logs Hi,I installed Remote Mount plugin, added and SMB share, it appears in /media/xxxxxxxxxxx folder and works fine. I'm using Raspberry pi2.The problem is these log lines that started when I configured the remote share.(Code, 3 lines)Any hints

Linux CentOS fstab cifs mount failed return code 95

  1. FAIL to mount cifs volume with return code = -13 [ 20090218205655] Program failure (-25) of crm [ 20081225004357] getting Mailman and Postfix to play nice together on gentoo [ 20081111115501] Where the hell did my swap go?! [ 20081030110717] Enable tftp on slowaris 10 [ 20080617222744] Getting smtp-auth to work on Gentoo with qmail.
  2. This section provides an overview of status codes that can be returned by the SMB commands listed in this document, including mappings betwee
  3. CIFS VFS SessSetup = -13 cifs_mount failed in Xen (or Unix) Posted by Carlos Villabrille on December 3, 2018. Posted in: OS Categories, XEN. Tagged: CIFS, CTX132665, LinuxExtensionsEnabled, modprobe, ntlmssp, NT_STATUS_LOGON_FAILURE, SecurityFlags, SessSetup, XEN. Leave a Comment. While trying to mount a CIFs share folder you receive the following error: mount error(13): Permission denied.
  4. CIFS VFS: cifs_mount failed return code -13 0xc000006d NT_STATUS_LOGON_FAILUR
  5. [78165.567002] CIFS VFS: protocol revalidation - security settings mismatch [78165.578589] CIFS VFS: session ffff96dc072fe400 has no tcon available for a dfs referral request [78165.588988] CIFS VFS: cifs_mount failed w/return code = -

Samba Client cifs › Wiki › ubuntuusers

Diagnosing CIFS Permission denied or cifs_mount failed w/return code = -13 errors Solution Verified - Updated 2019-10-15T21:06:20+00:00 - Englis CIFS VFS: cifs_mount failed w/return code = -22 CIFS VFS: No username specified. Wenn ich Benutzername und Passwort direkt in der fstab angebe klappt es (ist mir jedoch zu riskant). Weiss jemand, was ich machen muss, damit das Mounten mit den. Hi Im trying to mount a smb share on a linux nas at the Address 1921681183 ODROIDXU4SHAREPath MyfilesShareI have made a file smbcredent..

CIFS mount error on windows server share - CentO

Aborting operation. CIFS VFS: cifs_mount failed w/return code = -101. FRAGE: Wie werde ich die Fehlermeldung los? Vielen Dank schon im voraus, Peter. Zuletzt geändert von peter7 am 07.10.2015 07:14:51, insgesamt 2-mal geändert. Nach oben . rendegast Beiträge: 15041 Registriert: 27.02.2006 15:50:33 Lizenz eigener Beiträge: MIT Lizenz. Re: cifs_mount failed. Beitrag von rendegast » 01.10. mount error(13): Permission denied Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) This is the command that I use: sudo mount -t cifs //Server/Share /G -o username=USER,sec=ntlmv2 The same command works when I boot into a Centos 6.0 kernel. Steps To Reproduce: Try to mount the CIFS drive under Centos 6.2. It happens every time. Tags: No tags attached. Activities toracat. 2012-01. [ 36.272963] CIFS VFS: cifs_mount failed w/return code = -13 Ich habe natürlich fstab kontrolliert sowie die credentials Datei und auch den einhängepunkt. Hatte auch noch ein paar Backups dieser Dateien, wo es unter Mint funktioniert hat, aber auch da kein Erfolg. Habs gerade nochmal mit meinem RPi probiert, da klappt alles super, also am NAS liegt es nicht. Ich bin ratlos. Danke für. In my case, I only needed to add the option vers=3.0 (CIFS was version 1, which is no longer supported since kernel 4.13, so I switched right to SMBv3 on the server) and still I had to reboot to make it work, this is my mount line in /etc/fstab now

[ubuntu] mount -t cifs results gives mount error(13

CIFS VFS: Connecting to DFS root not implemented yet CIFS VFS: cifs_mount failed w/return code = -22. Any ideas what else I could try or what this could be? linux share mount cifs superblock. share | improve this question | follow | edited Apr 14 '14 at 2:33. Moshe Katz. 12.6k 7 7 gold badges 55 55 silver badges 97 97 bronze badges. asked Jan 28 '14 at 9:27. user3242272 user3242272. 23 1 1. Cifs_mount failed w/return code = 111. Diagnosing CIFS Permission denied or cifs_mount failed w/return code = -13 errors Solution Verified - Updated 2019-10-15T21:06:20+00:00 - Englis smb annoyance return code = -111. i have an issue with a samba share. because of other frustrations, i change my firewall recently (four days ago) to shorewall. i got everything up and running pretty quickly, i. CIFS VFS: cifs_mount failed w/return code = -13. mount error(13): Permission denied. いったいどうしたらよいのでしょうか? 環境・前提条件. CentOS Linux release 7.3.1611; Kernel version 3.10.-514.el7; に以下をインストール済です。 samba-client 4.4.4-14; cifs-utils 6.2-9 . 結論、secオプションの指定. [795408.848372] CIFS VFS: cifs_mount failed w/return code = -2 [795429.985660] CIFS VFS: BAD_NETWORK_NAME: \\domaindfs.com\fs [795429.987223] CIFS VFS: cifs_mount failed w/return code = -2 [795442.437632] CIFS VFS: BAD_NETWORK_NAME: \\domaindfs.com\fs vers=1.0 turned off on windows by security reasons. Other versions do not works with DFS share. Steps To Reproduce: 3.10.-693.21.1.el7.x86_64. CIFS VFS: cifs_mount failed w/return code = -112. The same above command works in rhel7 and centos7. Any clue on how to make this work? centos6 mount rhel6 cifs host. share | improve this question | follow | asked Feb 6 '17 at 10:04. Arun Krishnan Arun Krishnan. 149 1 1 gold badge 2 2 silver badges 11 11 bronze badges. I assume its fully updated and you can ping the host from the RHEL6 machine.

[ 6297.093312] CIFS VFS: validate protocol negotiate failed: -11 [ 6297.095360] CIFS VFS: cifs_mount failed w/return code = -5 Dmesg output with the kernel CIFS module recompiled with the all the debugging information enabled: [58014.081891] No dialect specified on mount. Default has changed to a more secure dialect, SMB2.1 or later (e.g. SMB3), from CIFS (SMB1). To use the less secure SMB1. Ubuntu 13.04 - cifs Problem. Diskussionen, Trends, Gerüchte und Problemlösungen zum Open-Source-Betriebssystem Linux und Google Chrome. Hallo, Fremder! Scheinbar bist du neu hier. Wenn du mitmachen willst, Wähle eine der folgenden Optionen! Anmelden Registrieren. Quick-Links . Alle Kategorien; Neueste Diskussionen; Beste Inhalte; Unbeantwortet ; Kategorien. 1326684 Alle Kategorien; 342335. Mar 28 14:30:00 srvname kernel: CIFS VFS: cifs_mount failed w/return code = -13 いろいろと検索したところsecオプションが必要とか、domainオプションが必要とかいろいろとありますが、結局うまくいったのは以下のコマンドでした。 # mount -t cifs -o username=USER,password=PASS,domain=DOMAIN. CIFS VFS: cifs_mount failed w/return code = -115. Marcel. 13. Dezember 2016 um 21:07 Hallo Dominic, danke für die superschnelle Antwort, aber ich war schneller. Ich hatte bei dem Eintrag in die fstab einen kleinen Schreibfehler, so klein daß er mir nicht aufgefallen ist. Ich hatte den Eintrag so verändert daß ich auf Fritz-Nas auch gleich in den richtigen Ordner komme, dabei hat sich der.

Cannot Mount CIFS Share in LINUX TrueNAS Communit

CIFS shared file system is not mounted even after system reboot in CentOS/RHEL 7. If manually execute the mount -a command after the system is rebooted, the CIFS file system is normally mounted. Mount units referring to local and network file systems are distinguished by their file system type specification. In some cases this is not sufficient (for example network block device based mounts. CIFS mount intermittently unavailable: cifs_mount failed w/return code = -5. From: Robert S <robert.spam.me.senseless@gmail.com> Prev by Date: Re: [1/2OT] ssh & wireless related; Next by Date: Re: ssl-cert-snakeoil certificate. Previous by thread: Re: CIFS mount intermittently unavailable: cifs_mount failed w/return code = - Code: jan@I5-Server-Arzi ~ $ sudo mount -a mount error(95): Operation not supported Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) mount error(95): Operation not supported Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) mount error(95): Operation not supported Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) mount error(95): Operation not supported Refer. Diagnosing CIFS Permission denied or cifs_mount failed w/return code = -13 errors Solution Verified - Updated 2019-10-15T21:06:20+00:00 - Englis [ 32.220320] CIFS VFS: cifs_mount failed w/return code = -115. when I try to troubleshoot with smbclient I get the following output to the listed command: # smbclient //192.168.20.10/Share -U <username here> OUTPUT: protocol negotiation failed: NT.

Alfresco WCM Case Study: National Academy of Sciences

Ich habe festgestellt, dass cifs die IP-Adresse zuerst auflöst, dann als zusätzliche Mount-Option definiert und dann versucht, sie mithilfe des FQDN erneut bereitzustellen. An diesem Punkt stürzt das rr-dns ab, weil es z. mit der Option -o addr=10.0.0.x zugreifen, aber der fqdn storage.example.domain zeigt auf addr=10.0.0.y Might have a fix for you: The MD4 crypto kernel module is not compiled and packaged although it should. Not even if properly selected in make kernel_menuconfig Nov 9 00:37:27 sparkyxfce kernel: [ 13.055283] CIFS VFS: cifs_mount failed w/return code = -112 Nov 9 00:37:27 sparkyxfce systemd[1]: media-fritzbox.mount: Mount process exited, code=exited status=32 Nov 9 00:37:27 sparkyxfce systemd[1]: media-fritzbox.mount: Failed with result 'exit-code'. Nov 9 00:37:27 sparkyxfce systemd[1]: Failed to mount /media/fritzbox. Nov 9 00:37:27 sparkyxfce systemd. Univention Bugzilla - Bug 31328. cifs mount fails from /etc/fstab. Last modified: 2013-05-13 15:19:43 CES edoceo® is a registered trademark of Edoceo, Inc. All Content is © 1999-2020 Edoceo, IncEdoceo, In

Generated on 2019-Mar-29 from project linux revision v5.1-rc2 Powered by Code Browser 2.1 Generator usage only permitted with license. Code Browser 2.1 Generator usage only permitted with license Linuxユーザーの皆様におかれましては「今更かい!」だと思うんですけど... SystemRescueCd 6.0.2 でWindowsネットワーク(ネットワークドライブ)をマウントしようとしたところ、Win10マシンではおkなのにBuffaloの簡易NASではエラーが出るのはなんでかと調査開始。# mount -t cifs -o username=hogehoge,password. 準備ができていないときのエラー [[email protected] ~]# mount -t smbfs //192.168..6/share /mnt/nas mount: unknown filesystem type 'smbfs'[[email protected] ~]# mount -t smbfs //192.168..6/share /mnt/nas mount: unknown filesystem type 'smbfs' CIFS VFS: cifs_mount failed w/return code = -2 I tried to mount a samba partition on a NAS with CIFS but I'd the same problem. I resolved it in this way: I replaced kernel from 2.6.18-92.1.22 (modinfo cifs.ko: 1.50) to 2.6.18-53 (modinfo cifs.ko: 1.48aRH) and using sec=krb5, now it works!!

[SOLVED] unable to mount cifs file syste

Yes it does. smbclient, inspite of similar negotiate protocol response from the same server (extended security negotiation is not supported in flags2 in smb header), sends ntlmssp type 1 request and session setup proceeds followed by rest of the exchange. Let me look into cifs code. I will probably add more debug code in a patch CIFS VFS: cifs_mount failed w/return code = -13 . Changes. The default for the value of sec has changed over time. Cause. Sign In: To view full details, sign in with your My Oracle Support account. Register: Don't have a My Oracle Support account? Click to get started! In this Document. Symptoms: Changes: Cause : Solution: References: My Oracle Support provides customers with access to over a. Apr 5 13:17:12 raspberrypi kernel: [ 16.448706] CIFS VFS: cifs_mount failed w/return code = -112 Wenn ich es richtig verstanden habe, dann hat sich der Default Wert von V1.0 auf V2.1 geändert. Könnt ihr das bestätigen mount error(112): Host is down Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) Messages logs has this error: CIFS VFS: cifs_mount failed w/return code = -112. The.

06/17/13-MatrixAdapt | Logiciel de gestion d&#39;Entreprise

An SMB_ERROR MUST be interpreted in one of two ways, depending on the capabilities negotiated between client and server: either as an NTSTATU All of a sudden a CIFS mount point stopped working. Probably after a kernel update, according to sources. Syslog got this: $ grep cifs /var/log/syslog Dec 28 09:56:12 hostname kernel: [141586.846065] CIFS VFS: cifs_mount failed w/return code = -5. Not really helpful, could be few different things. Turns out Samba now defaults to version 3 of protocol but the old server I connect to doesn't.

The CIFS code contains a number of debugging statements that can be enabled. If you ask for help on the list, one of the developers may ask you for this info. You can also turn it on on your own, but it's not generally helpful unless you're willing to dig into the code Jan 23 13 13:57:57:57 kernel: CIFS VFS: cifs_mount failed w/return code = -11 I also tried manually with the file fstab and the umout command -a -v but the same: mount error(11): Resource temporarily unavailabl Step 1 - Installing CIFS Utils. To mount a CIFS share on Linux, we first need to install cifs-utils. Let's get started with that. sudo apt-get install cifs-utils -y It should probably be pre-installed in most distros anyway. Step 2 - Creating a Mount Point. Next, we need to create the Directory where we want to Mount our Share in. You can. Unrecognized cifs mount options passed to the cifs vfs kernel code will be logged to the kernel log. mount.cifs causes the cifs vfs to launch a thread named cifsd. After mounting it keeps running until the mounted resource is unmounted (usually via the umount utility). mount.cifs -V command displays the version of cifs mount helper

Mount command failed, returncode=32 · Issue #1

[86913.527200] CIFS VFS: cifs_mount failed w/return code = -13. RAW Paste Data Public Pastes. Text Inversor. Python | 56 min ago . passwords. Lua | 2 hours ago . Untitled. C++ | 2 hours ago. Browse the source code of linux/fs/cifs/connect.c. 1 /* 2 * fs/cifs/connect.c: 3 * 4 * Copyright (C) International Business Machines Corp., 2002,201 Сбой команды cifs: mount error(13): Permission denied Refer to the mount.cifs(8) manual page (eg man mount.cifs) И у dmesg есть сообщение: [169895.357046] CIFS VFS: cifs_mount failed w/return code = -13 [170370.733123] CIFS VFS: cifs_read_super: get root inode faile

CIFS Remote Ordner Das deutsche Synology Support Foru

[ 21.400708] CIFS VFS: cifs_mount failed w/return code = -101 However, if I run the command as root after the system boots it works fine. Been using this method on other distros for over a year. An update that solves 13 vulnerabilities and has 157 fixes is now available. Description: The SUSE Linux Enterprise 12 SP5 kernel was updated to receive various security and bugfixes. Connect outlook. Jun 27 11:43:35 desinfect kernel: [ 37.099655] CIFS VFS: cifs_mount failed w/return code = -13. Gr. Hebamme29. Das Posting wurde vom Benutzer editiert (27.06.2017 11:55). Bewerten-+ Thread-Anzeige. Re: Mount cifs - host is down « Antwort #6 am: 02.02.2018, 15:14:48 » Ich denke auch, dass ich einfach mal bei dem Kernel bleibe.Was mich irritiert, ist, dass ich immer wiedermal eine neue 13-Version (inzwischen 38) bekomme, diese als installiert angezeigt wird, aber trotzdem Linu immer mit 26 startet, Bei den speziellen Optionen stehen verschiedene Kernel zur Auswahl, aber eben keiner über 2 I'm using a custom rom based on cyanogenmod 13, my device is rooted and I have Xposed installed. I'm looking for a simple app to mount samba or cifs volume in a directory on my android devices, years ago I used Cifs Manager and Mount Manager but it seems they have been discontinue and now I can't find valid alternatives ; Netzwerkfreigaben (auch NAS) mit Android und iOS . Nutzern von Android.

cifs: fix return code when failing to rename a file onto a directory 10052149 diff mbox. Message ID: 20171109235249.8013-1-lsahlber@redhat.com: State: New: Headers: show Commit Message. Ronnie Sahlberg Nov. 9, 2017, 11:52 p.m. UTC. Cifs servers return ACCESS_DENIED when trying to rename onto a non-empty directory. This is different from xfstest where we expect this to return -EEXIST instead. Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) mount error(22): Invalid argument 在Nautilus中,共享可见,但没有挂载,当我单击某个共享时,得到以下消息: mount: only root can mount //192.168.1.71/photos on /media/photo Oct 12 16:20:01 localhost kernel: CIFS VFS: cifs_mount failed w/return code = -13. 二、没有分享目录 . Retrying with upper case share name mount error(6): No such device or address Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) 对应 /var/log/messages 记录. Oct 12 16:20:06 localhost kernel: CIFS VFS: cifs_mount failed w/return code = -6 Oct 12 16:20:17 localhost kernel. CIFS VFS: cifs_mount failed w/return code = -6; Hat einer ne Idee, was falsch gelaufen ist ?! Ich bin der festen überzeugung, wenn ich den Server (NAS) neustarte, gehts wieder - aber wahrscheinlich nur einmal. Liebe Grüße. Marcel . frosch2. Inventar. Beiträge 4.803 Vorname Lutz NAS 1 TS-439 II Pro NAS 2 Eigenbau mit debian 10, zfs-Dateisystem BS Windows 10. 17. Juni 2010 #2; Hi, ich. >> CIFS VFS: cifs_mount failed w/return code = -112 >> > > Your client sent an SMB_COM_NEGOTIATE request and the server never > responded. > >> I have not found any errors logged in Windows 7 but perhaps I don't know where to look. >> I can access the Windows 7 share with no problems using smbclient on Linux. >> Any ideas will be very much appreciated. > > Probably a client kernel bug. Might.

Samba Status Code Returned 0xc000006d NT_STATUS_LOGON

Aborting operation Feb 9 14:08:29 ldap kernel: [143452.140492] CIFS VFS: cifs_mount failed w/return code = -115. Socket error, we know what this is right? IP or port. Ping for domain/IP or Telnet to test port: bash code. ping IP telnet IP 445. Telnet was timing out, port closed for IP in firewall. READ 6 Best Sketch Alternatives for Windows and Linux. SOLUTION 3: LEM mount error(115. hallo ich mounte ein windows-share, das bis jetzt auch immer funktioniert hat. seit ein paar tagen erhalte ich folgende meldungen in den logs: Jul 22 13:09:01 cknux kernel: CIFS VFS: No response for cmd 114 mid 12959 Jul 22 13:09:01 cknux kernel: CIFS VFS: No response for cmd 114 mid 12960 Jul 22 13:09:01 cknux kernel: CIFS VFS: No response for cmd 114 mid 12961 Jul 22 13:09:01 cknux kernel. CIFS VFS: cifs_mount failed w/return code = -112 . I have not found any errors logged in Windows 7 but perhaps I don't know where to look. I can access the Windows 7 share with no problems using smbclient on Linux. Any ideas will be very much appreciated. Thanks! Yanko -- To unsubscribe from this list go to the following URL and read th 2012-10-08 - Jeff Layton <jlayton@redhat.com> 4.8.1-14 - fix return code when mount.cifs runs out of addresses to try (bz 856729) 2012-08-29 - Jeff Layton <jlayton@redhat.com> 4.8.1-13 - fix conflict between rw and rwpidforward mount options (bz 843596) 2012-08-23 - Jeff Layton <jlayton@redhat.com> 4.8.1-12 - add stock request-key config files in /etc/request-key.d (bz 843617) 2012-08-22. ----- Comment #1 From Ben Smith 2008-07-03 16:08:35 CST ----- I am all of a sudden receiving similar errors attempting to mount a w2k3 share with CIFS

20.04 - CIFS VFS: cifs_mount failed w/return code = -2 ..

issue kernel 4.13 was a troll I set a new user on windows server to allow mount shared folders I used administrator account but it doesnt works with mount.cifs command only Nemo can succeed then I create a new user with admin rights and it works with mount.cifs. Now it works Hier habe ich 2 von 3 Freigaben vorerst auskommentiert, da ich nur mit der ersten teste. Dazu möchte ich noch sagen, dass ich zu jeder Zeit (auch anfangs mit der ersten Fehlermeldung) als root mit mount -a alle Laufwerke mounten konnte

The code below didn't work. The web UI would just hang. nounix,sec=ntlmssp. Just to be clear I set the airport extreme up with an account. The Airport's attached hard drive in my case is named AirportNAS which is what I used for the remote directory. Thanks for all the help Lag-na mount.cifs return code = -128. Could someone tell me what this return code means? This is mount.cifs version 4.8.1 on a centos 6.4 workstation joined to an AD domain, using automount with.. [13239804.848205] CIFS VFS: cifs_mount failed w/return code = -13 I have also tried sec=krb5 and other variations, to no avail. Any ideas what I can do? Share this post. Link to post. x. Mark this reply as best answer, if it answered your question. Learn more. x. Upvote if you found this answer helpful or interesting. Learn more . 0; Tobias Kreidl | 10,746 0; Tobias Kreidl | Genius | 10,746. Code: sh-4.2$ su -c zypper in yast2-runlevel.... open YaST, click on `System Services (Runlevel)', make sure cifs is enabled for all runlevels then: Code: sh-4.2$ su -c mount -a.... and if should be mounted if the /mnt/cifs/host1 directory exists. 22-Nov-2013, 03:45 #3. wolfi323. View Profile View Forum Posts View Blog Entries View Articles Global Moderator Join Date Jan 2010 Posts 22,819. Contribute and win prizes. Hacktoberfest! Contribut The statistics returned include counters which represent the number of attempted and failed (ie non-zero return code from the server) SMB3 (or cifs) requests grouped by request type (read, write, close etc.). Also recorded is the total bytes read and bytes written to the server for that share. Note that due to client caching effects this can be less than the number of bytes read and written by.

  • Dunhill pfeifentabak navy rolls.
  • Gen 1 11 zusammenfassung.
  • Br mediathek dahoam is dahoam podcast.
  • Wizz air romania contact.
  • Right now jeanette biedermann übersetzung.
  • Queen heaven planetarium stuttgart.
  • Gwen stefani kinder alter.
  • Knaufmanufaktur gutschein.
  • Hola safari kenya.
  • Hotel auf dem schauinsland.
  • Ich seh ich seh netflix handlung.
  • Cruisergewicht rangliste.
  • Basteln mit lebkuchen.
  • Kosename meine liebe bedeutung.
  • Weiches metall cer.
  • Bangkok strand entfernung.
  • Rumänische sprache sprachfamilie.
  • Tukan steckbrief für kinder.
  • Kurze halskette silber.
  • Grundschulkönig umlaute.
  • Flohmittel hund testsieger 2017.
  • Ländercode deutschland samsung fernseher.
  • Heim telefonie app.
  • Speisekarte culinarium.
  • Hasse meine tochter.
  • Beratung auswandern.
  • Reiserücktrittsversicherung ohne selbstbehalt definition.
  • Öbb ticket schüler.
  • Santander kreditkarte neuseeland.
  • Schwangerschaft im schuldienst.
  • Gewichtsklassen kickboxen.
  • Proko.
  • Südsee kreuzfahrt msc.
  • Langstielige blumen.
  • Deutschrap künstler 2019.
  • Elektroartikel in der nähe.
  • Gesetz der rache 2009.
  • Hq definition.
  • Songs with numbers in the title.
  • Juleica alter.
  • Brauner farbton.